3/8" Natural Sand — Screened
Screened natural sand, approx. 3/8 in. top size
Natural sand screened to an approximate 3/8 inch top size for project-specific bedding, leveling, backfill, and general sand applications. Confirm the required gradation, compaction, drainage, and finished-use requirements before scheduling.
Where it shines
- ✓Project-specific bedding and leveling where the required gradation fits
- ✓Backfill and general sand applications
- ✓Smoothing and filling under site-specific direction
Not the right choice for
- ✕Drainage layers that require clean, open stone
- ✕Paver bedding unless the project calls for this exact material
- ✕Structural fill or engineered work without confirming the specification
- ✕Visible finish work where color or texture has not been confirmed
What is 3/8 inch screened natural sand?
3/8 inch natural sand screened is a natural sand material sold with an approximate 3/8 inch top size. It is a project-specific sand option for bedding, leveling, backfill, and other uses where the required gradation matches the material being quoted.
The billing name does not replace a plan or specification. Sand can vary by source, current production, moisture, fines, and visible appearance. Confirm the required gradation and intended use before dispatch.
Springville bedding-sand delivery
This material was loaded for a confirmed Springville, Utah project. That delivery shows Ironside’s material-hauling work in southern Utah County; it does not identify the project, supplier, exact specification, or a standing source arrangement.
Where it can fit
Screened natural sand can fit bedding, leveling, backfill, and general sand work when the project calls for this material range. It may be useful where a natural sand with some larger particles is appropriate, but the exact application should be confirmed before ordering.
For paver bedding, pipe work, drainage, or structural details, use the plan requirement rather than a generic material name. Compare washed concrete sand and filter press sand when the project needs a different sand type.
Ordering tips
- Send the relevant plan note or installation detail. “Sand” alone is not a full material specification.
- Tell us whether it will remain visible. Natural color and texture vary by source and current conditions.
- Share site photos and access constraints. Placement, access, slope, and truck configuration affect the quote.
- Use the calculator for planning, then confirm the material. Final quantity and source selection are job-specific.
Material Calculator — 3/8" Natural Sand — Screened
Estimate only — add 10–20% for compaction loss on structural material. Ask us for a firm quote before ordering.
Request a Quote for 3.5 Tons →Frequently Asked Questions
What is 3/8 inch screened natural sand?+
It is natural sand screened to an approximate 3/8 inch top size. The exact gradation, fines, moisture, and appearance can vary by source and current conditions, so confirm the quoted material against the project requirement.
Can 3/8 inch screened natural sand be used for bedding?+
It can fit some bedding and leveling applications when the project calls for this gradation. Do not assume it is interchangeable with washed concrete sand, paver bedding sand, or pipe bedding without confirming the plan or installation requirement.
Does screened natural sand drain like clean rock?+
No. Sand behavior depends on its fines and gradation; it is not a substitute for a clean open-graded drainage layer. Tell us how and where it will be placed when requesting a quote.
How much does screened natural sand weigh?+
Use the calculator as a planning estimate only. Actual tons per yard depend on moisture, source conditions, and the specific material being quoted.
Get a quote for 3/8" Natural Sand — Screened
Tell us the material and the project — we'll get back to you fast with pricing and delivery.